间歇运动机构 intermittent motion mechanism简谐运动 simple harmonic motion
减摩性 anti-friction quality
减速比 reduction ratio
减速齿轮、减速装置 reduction gear
减速器 speed reducer
键 key
键槽 keyway
渐开螺旋面 involute helicoid
渐开线 involute
渐开线齿廓 involute profile
渐开线齿轮 involute gear
渐开线发生线 generating line of involute
渐开线方程 involute equation
渐开线函数 involute function
渐开线花键 involute spline
渐开线蜗杆 involute worm
渐开线压力角 pressure angle of involute
胶合 scoring
交变应力 repeated stress
交变载荷 repeated fluctuating load
交叉带传动 cross-belt drive
交错轴斜齿轮 crossed helical gears
铰链、枢纽 hinge
角加速度 angular acceleration
角接触球轴承 angular contact ball bearing
角接触推力轴承 angular contact thrust bearing
角接触向心轴承 angular contact radial bearing
角接触轴承 angular contact bearing
角速比 angular velocity ratio
角速度 angular velocity
接触式密封 contact seal
接触应力 contact stress
阶梯轴 multi-diameter shaft
截面 section
节点 pitch point
节距 circular pitch; pitch of teeth
节线 pitch line
节圆 pitch circle
节圆齿厚 thickness on pitch circle
节圆直径 pitch diameter
节圆锥 pitch cone
节圆锥角 pitch cone angle
结构 structure
结构设计 structural design
解析设计 analytical design
紧边 tight-side
紧固件 fastener
静力 static force
静密封 static seal
静平衡 static balance
静载荷 static load
径节 diametral pitch
径向 radial direction
径向当量动载荷 dynamic equivalent radial load
径向当量静载荷 static equivalent radial load
径向基本额定动载荷 basic dynamic radial load rating
径向基本额定静载荷 basic static radial load tating
径向间隙 clearance
径向接触轴承 radial contact bearing
径向平面 radial plane
径向游隙 radial internal clearance
径向载荷 radial load
径向载荷系数 radial load factor
局部自由度 passive degree of freedom
矩形螺纹 square threaded form
矩形牙嵌式离合器 square-jaw positive-contact clutch
矩阵 matrix
锯齿形螺纹 buttress thread form
绝对尺寸系数 absolute dimensional factor
绝对速度 absolute velocity
绝对运动 absolute motion
均衡装置 load balancing mechanism
开口传动 open-belt drive
开链机构 open chain mechanism
开式链 open kinematic chain
抗压强度 compression strength
可靠度 degree of reliability
可靠性 reliability
可靠性设计 reliability design, RD
空间机构 spatial mechanism
空间连杆机构 spatial linkage
空间凸轮机构 spatial cam
空间运动副 spatial kinematic pair
空间运动链 spatial kinematic chain
空气弹簧 air spring
空转 idle
宽度系列 width series
框图 block diagram
雷诺方程 Reynolds‘s equation
离合器 clutch
离心力 centrifugal force
离心密封 centrifugal seal
离心应力 centrifugal stress
理论廓线 pitch curve
理论啮合线 theoretical line of action
隶属度 membership
力 force
力多边形 force polygon
力封闭型凸轮机构 force-drive (or force-closed) cam mechanism