﹛﹛Article 6Recognition of Conformity Assessment by Central Government Bodies
With respect to their central government bodies:
6.1 Without prejudice to the provisions of paragraphs 3 and 4, Members shall ensure, whenever possible, that results of conformity assessment procedures in other Members are accepted, even when those procedures differ from their own, provided they are satisfied that those procedures offer an assurance of conformity with applicable technical regulations or standards equivalent to their own procedures. It is recognized that prior consultations may be necessary in order to arrive at a mutually satisfactory understanding regarding, in particular:
6.1.1 adequate and enduring technical competence of the relevant conformity assessment bodies in the exporting Member, so that confidence in the continued reliability of their conformity assessment results can exist; in this regard, verified compliance, for instance through accreditation, with relevant guides or recommendations issued by international standardizing bodies shall be taken into account as an indication of adequate technical competence;
6.1.2 limitation of the acceptance of conformity assessment results to those produced by designated bodies in the exporting Member.
6.2 Members shall ensure that their conformity assessment procedures permit, as far as practicable, the implementation of the provisions in paragraph 1.
6.3 Members are encouraged, at the request of other Members, to be willing to enter into negotiations for the conclusion of agreements for the mutual recognition of results of each other's conformity assessment procedures. Members may require that such agreements fulfil the criteria of paragraph 1 and give mutual satisfaction regarding their potential for facilitating trade in the products concerned.
6.4 Members are encouraged to permit participation of conformity assessment bodies located in the territories of other Members in their conformity assessment procedures under conditions no less favourable than those accorded to bodies located within their territory or the territory of any other country.
Article 7
Procedures for Assessment of Conformity by Local Government Bodies
With respect to their local government bodies within their territories:
7.1 Members shall take such reasonable measures as may be available to them to ensure compliance by such bodies with the provisions of Articles 5 and 6, with the exception of the obligation to notify as referred to in paragraphs 6.2 and 7.1 of Article 5.
7.2 Members shall ensure that the conformity assessment procedures of local governments on the level directly below that of the central government in Members are notified in accordance with the provisions of paragraphs 6.2 and 7.1 of Article 5, noting that notifications shall not be required for conformity assessment procedures the technical content of which is substantially the same as that of previously notified conformity assessment procedures of central government bodies of the Members concerned.
7.3 Members may require contact with other Members, including the notifications, provision of information, comments and discussions referred to in paragraphs 6 and 7 of Article 5, to take place through the central government.
7.4 Members shall not take measures which require or encourage local government bodies within their territories to act in a manner inconsistent with the provisions of Articles 5 and 6.
7.5 Members are fully responsible under this Agreement for the observance of all provisions of Articles 5 and 6. Members shall formulate and implement positive measures and mechanisms in support of the observance of the provisions of Articles 5 and 6 by other than central government bodies.
Article 8
Procedures for Assessment of Conformity by Non-Governmental Bodies
8.1 Members shall take such reasonable measures as may be available to them to ensure that non-governmental bodies within their territories which operate conformity assessment procedures comply with the provisions of Articles 5 and 6, with the exception of the obligation to notify proposed conformity assessment procedures. In addition, Members shall not take measures which have the effect of, directly or indirectly, requiring or encouraging such bodies to act in a manner inconsistent with the provisions of Articles 5 and 6.
8.2 Members shall ensure that their central government bodies rely on conformity assessment procedures operated by non-governmental bodies only if these latter bodies comply with the provisions of Articles 5 and 6, with the exception of the obligation to notify proposed conformity assessment procedures.
Article 9
International and Regional Systems
9.1 Where a positive assurance of conformity with a technical regulation or standard is required, Members shall, wherever practicable, formulate and adopt international systems for conformity assessment and become members thereof or participate therein.
9.2 Members shall take such reasonable measures as may be available to them to ensure that international and regional systems for conformity assessment in which relevant bodies within their territories are members or participants comply with the provisions of Articles 5 and 6. In addition, Members shall not take any measures which have the effect of, directly or indirectly, requiring or encouraging such systems to act in a manner inconsistent with any of the provisions of Articles 5 and 6.
9.3 Members shall ensure that their central government bodies rely on international or regional conformity assessment systems only to the extent that these systems comply with the provisions of Articles 5 and 6, as applicable.
INFORMATION AND ASSISTANCE
Article 10
Information About Technical Regulations, Standards and
Conformity Assessment Procedures
10.1 Each Member shall ensure that an enquiry point exists which is able to answer all reasonable enquiries from other Members and interested parties in other Members as well as to provide the relevant documents regarding:
10.1.1 any technical regulations adopted or proposed within its territory by central or local government bodies, by non-governmental bodies which have legal power to enforce a technical regulation, or by regional standardizing bodies of which such bodies are members or participants;