GB/T 984-1985 堆焊焊條 Covered electrodes for hardfacing

GB/T 985-1988 气焊﹛手工電弧焊及气体保護焊焊縫坡口的基本形式与尺寸 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas-Shielded arc welding

GB/T 986-1988 埋弧焊焊縫坡口的基本形式和尺寸 Basic forms and sizes of weld grooves for submerged arc welding

GB/T 1173-1995 鑄造鋁合金 Casting aluminium alloys

GB/T 1174-1992 鑄造軸承合金 cast bearing metals

GB/T 1176-1987 鑄造銅合金技術條件 Specification for cast copper alloys

GB/T 1177-1991 鑄造鎂合金 Casting magnesium alloys

GB/T 1348-1988 球墨鑄鐵件 Spheroidal graphite iron castings

GB/T 1954-1980 鉻鎳奧氏体不鏽鋼焊縫鐵素体含量測量方法 Determination of the weldign seam iron element contentin chromium,nickel austenitic stainless steel

GB/T 2100-1980 不鏽耐酸鋼鑄件技術條件 Stainless acid-resistant steel castings--Specifications

GB/T 2649-1989 焊接接頭机械性能試驗取樣方法 Methods of sampling for mechanical properties tests of welded joint

GB/T 2650-1989 焊接接頭衝擊試驗方法 Method of impact test for welded joint

GB/T 2651-1989 焊接接頭拉伸試驗方法 Method of tensile test for welded joint

GB/T 2652-1989 焊縫及熔敷金屬拉伸試驗方法 Method of tensile tests for weld and deposited metal

GB/T 2653-1989 焊接接頭彎曲及壓扁試驗方法 Methods of bend and compression tests for welded joint

GB/T 2654-1989 焊接接頭及堆焊金屬硬度試驗方法 Methods of hardness tests for welded joint and surfacing metal

GB/T 2655-1989 焊接接頭應變時效敏感性試驗方法 Method of strain-age sensibillity test for welded joint

GB/T 2656-1981 焊縫金屬和焊接接頭的疲勞試驗法 Weld beads metal and welds--Fatigue test

GB/T 2684-1981 鑄造用原砂及混合料試驗方法 Foundry sands and sand mixtures for casting--Method of testing

GB/T 3180-1982 中錳抗磨球墨鑄鐵件技術條件 Specification for medium manganese wear-resistant spheroidal iron castings

GB/T 3375-1994 焊接術語 Welding terminology

GB/T 3669-1983 鋁及鋁合金焊條 Coated electrodes for aluminium and aluminium alloys

GB/T 3670-1995 銅及銅合金焊條 Coated electrodes for copper and copper alloys

GB/T 3731-1983 涂料焊條效率﹛金屬回收率和熔敷系數的測定 Covered electrodes--Determination of the efficiency, metal recovery and deposition coefficient

GB/T 3934-1983 普通螺紋量規 Gauges for general purpose screw threads

GB/T 3965-1995 熔敷金屬中擴散氫測定方法 Methods for determination of diffusible hydrogen in deposited metal 29 GB/T 4675.1-1984 焊接性試驗 斜Y型坡口焊接裂紋試驗方法 Weldability testing--Method of Y-groove cracking test

GB/T 4675.2-1984 焊接性試驗 搭接接頭(CTS) 焊接裂紋試驗方法 Weldability testing--Method of controlled thermal severity cracking test

GB/T 4675.3-1984 焊接性試驗 T型接頭焊接裂紋試驗方法 Weldability testing--Method of cracking test for welded tee joint

GB/T 4675.4-1984 焊接性試驗 壓板對接(FISCO) 焊接裂紋試驗方法 Weldability testing--Method of FISCO cracking test

GB/T 4675.5-1984 焊接性試驗 焊接熱影響區最高硬度試驗方法 Weldability testing--Testing method of maximum hard ness in weld heat-affected zone

GB/T 4863-1985 机械制造工藝基本術語 General terminology of machine-building technology

GB/T 5117-1995 碳鋼焊條 Carbon steel covered electrodes

GB/T 5118-1995 低合金鋼焊條 Low alloy steel covered electrodes

GB/T 5185-1985 金屬焊接及　焊方法在圖樣上的表示代號 Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings

GB/T 5293-1985 碳素鋼埋弧焊用焊劑 Fluxes for the submerged arc welding of carbon steel

GB/T 5613-1995 鑄鋼牌號表示方法 Code for representing cast steels

GB/T 5614-1985 鑄鐵件熱處理狀態的名稱﹛定義及代號 The designations definitions and symbols for heat treatment tempers of iron castings

GB/T 5615-1985 鑄鋼件熱處理狀態的名稱﹛定義及代號 The designations, definitions and symbols for heat treatment tempers of steel castings

GB/T 5676-1985 一般工程用鑄造碳鋼 Cast carbon steels for general engineering purposes

GB/T 5677-1985 鑄鋼件射線照相及底片等級分類方法 Methods of radiographic testing and classification of radiographs for steel castings

GB/T 5678-1985 鑄造合金光譜分析取樣方法 The method for sampling cast alloys for spectrochemical analysis

GB/T 6208-1995 　料型號表示方法 Filler metal for soft soldering and brazing--Designation

GB/T 6296-1986 灰鑄鐵衝擊試驗方法 Grey cast iron impact test

GB/T 6416-1986 影響鋼熔化焊接頭質量的技術因素 Technical factors influencing the quality of the fusion welded joints in steel

GB/T 6417-1986 金屬熔化焊焊縫缺陷分類及說明 Classification of imperfections in metallic fusion welds, with explanations

GB/T 6418-1993 銅基　料 Copper base brazing filler metals

GB/T 6967-1986 工程結构用中﹛高強度不鏽鋼鑄件 Medium and high strength stainless steel castings for engineering structure purposes

GB/T 7032-1986 T型角焊接頭彎曲試驗方法 Method of bend test for T type fillet welded joint

GB/T 7143-1986 鑄造用硅砂化學分析方法 Methods for chemical analysis of silica sand for foundry

GB/T 7216-1987 灰鑄鐵金相 Gray cast iron metallography

GB/T 7232-1987 金屬熱處理工藝術語 Terminology of metal heat treatment

GB/T 7233-1987 鑄鋼件超聲探傷及質量評級標准 Methods for ultrasonic testing and for specifying quality levels of steel castings

GB/T 7659-1987 焊接結构用碳素鋼鑄件 Carbon steel castings suitable for welded structure

GB/T 8063-1994 鑄造有色金屬及其合金牌號表示方法 Designation of cast nonferrous metals and their alloys

GB/T 8110-1995 气体保護電弧焊用碳鋼﹛低合金鋼焊絲 Welding wires for gas shielding arc welding of carbon and low alloy steels

GB/T 8121-1987 熱處理工藝材料名詞術語 The terminology of technological materials for heat treatment

GB/T 8263-1987 抗磨白口鑄鐵技術條件 Specification for abrasion resistant white cast irons

GB/T 8454-1987 焊條用還原鈦鐵礦粉中亞鐵量的測定 Determination of ferrous iron content in reduced ilmenite powder for welding rod

GB/T 8491-1987 高硅耐蝕鑄鐵件 Corrosion resistant high silicon iron castings

GB/T 8492-1987 耐熱鋼鑄件 Heat resistant steel castings

GB/T 8493-1987 一般工程用鑄造碳鋼金相 Metallograph of cast carbon steels for general engineering purposes

GB/T 8539-1987 齒輪材料及熱處理質量檢驗的一般規定 General specification for quality inspection of gear materials and their heat treatment

GB/T 8619-1988 　縫強度試驗方法 Method of the strength test for brazed and soldered seam

GB/T 9437-1988 耐熱鑄鐵件 Heat resistant iron castings

GB/T 9438-1988 鋁合金鑄件技術條件 Aluminium alloy castings--Technical specification

GB/T 9439-1988 灰鑄鐵件 Grey iron castings

GB/T 9440-1988 可鍛鑄鐵件 Malleable iron castings

GB/T 9441-1988 球墨鑄鐵金相檢驗 Metallographic test for spheroidal graphite cast iron

GB/T 9446-1988 焊接用插銷冷裂紋試驗方法 Welding--Cold cracking test method using implants

GB/T 9447-1988 焊接接頭疲勞裂紋擴展速率試驗方法 Test method for fatigue crack growth rates of welded joints

GB 9448-1988 焊接与切割安全 Safety in welding and cutting

GB/T 9450-1988 鋼件滲碳淬火有效硬化層深度的測定和校核 Determination and verification of the effective depth of carburizod and hardened cases of steel parts

GB/T 9451-1988 鋼件薄表面總硬化層深度或有效硬化層深度的測定 Determination of total or effective thickness of thin surface hardened layers of steel parts

GB/T 9452-1988 熱處理爐有效加熱區測定方法 Testing method for working zone of heat treating furnace

GB/T 9460-1988 銅及銅合金焊絲 Welding wire and rods of copper and copper alloys

GB/T 10044-1988 鑄鐵焊條及焊絲 Covered electrodes and welding rods for welding cast iron

GB/T 10045-1988 碳鋼藥芯焊絲 Carbon steel flux cored wires for arc welding

GB/T 10046-1988 銀基　料 Silver brazing filler metals

GB/T 10858-1989 鋁及鋁合金焊絲 Aluminium and aluminium alloy welding rods and wires

GB/T 10859-1989 鎳基　料 Nickel base brazing filler metals

GB/T 11350-1989 鑄件机械加工余量 Machining allowances on castings

GB/T 11351-1989 鑄件重量公差 Mass tolerances for castings

GB/T 11352-1989 一般工程用鑄造碳鋼件 Carbon steel castings for general engineering purposes

GB/T 11354-1989 鋼鐵零件 滲氮層深度測定和金相組織檢驗 Steel-iron parts﹛Determination of nitrided case depth and metallographic examination of nitriding structure

GB/T 11363-1989 　焊接頭強度試驗方法 Methods of the strength tests for brazed and soldered joint

GB/T 11364-1989 　料鋪展性及填縫性試驗方法 Test method of spreadability and clearance filling ability for filler metal

GB/T 12214-1990 熔模鑄造用硅砂﹛粉 Silica sand and flour for investment casting

GB/T 12215-1990 熔模鑄造用鋁礬土砂﹛粉 Bauxite sand and flour for investment casting

GB/T 12216-1990 鑄造用合脂粘結劑 The residue from distillation of synthetic fatty acids as binder for foundry

GB/T 12361-1990 鋼質模鍛件 通用技術條件 General specification of steel die forgings

GB/T 12362-1990 鋼質模鍛件 公差及机械加工余量 Tolerances and machining allowances of steel die forgings

GB/T 12363-1990 鍛件功能分類 Classification of forging functions

GB/T 12469-1990 焊接質量保証 鋼熔化焊接頭的要求和缺陷分級 Quality assurance of welding﹛Requirement for fusion welding joint of steel and classification for imperfection

GB/T 12470-1990 低合金鋼埋弧焊用焊劑 Fluxes for the submerged arc welding of low alloy steel

GB/T 12603-1990 金屬熱處理工藝分類及代號 Classification and designation on metal heat treatment

GB 12935-1991 焊條烘干爐運行能耗標准 Energy consumption standard in operation of covered electrode furnace

GB/T 13311-1991 鍋爐受壓元件焊接接頭机械性能試驗方法 Boiler pressure parts﹛Mechanical test for welded joints

GB/T 13320-1991 鋼質模鍛件 金相組織評級圖及評定方法 Metallographic grading atlas and assessing method for steel die forgings

GB/T 13450-1992 對接焊接頭寬板拉伸試驗方法 Method of wide plate tension test for butt welded joint

GB/T 13679-1992 錳基　料 Manganese base brazing filler metals

GB/T 13814-1992 鎳及鎳合金焊條 Nickel and nickel alloy covered welding electrodes

GB/T 13815-1992 鋁基　料 Aluminium base brazing filler metals

GB/T 13816-1992 焊接接頭脈動拉伸疲勞試驗方法 Test method for pulsed tensile fatigue of welded joints

GB/T 13817-1992 對接接頭剛性拘束焊接裂紋試驗方法 Method of rigid restraint cracking test for welding butt joint

GB/T 13818-1992 壓鑄鋅合金 Zinc die-casting alloys

GB/T 13819-1992 銅合金鑄件 Copper alloy castings

GB/T 13820-1992 鎂合金鑄件 Magnesium alloy castings

GB/T 13821-1992 鋅合金壓鑄件 Zinc alloy die castings

GB/T 13822-1992 壓鑄有色合金試樣 Test specimens for non ferrous diecasting alloys

GB/T 13914-1992 衝壓件尺寸公差 Tolerance of dimensions for stampings

GB/T 13915-1992 衝壓件角度公差 Tolerance of angles for stampings

GB/T 13916-1992 衝壓件形狀和位置未注公差 Unnoted tolerance of shape and position for stampings

GB/T 13925-1992 鑄造高錳鋼金相 Metallographs for high manganese cast steel

GB/T 14235.1-1993 熔模鑄造模料 熔點測定方法(冷卻曲線法) Testing method for melting point of pattern materials in investment casting

GB/T 14235.2-1993 熔模鑄造模料 抗彎強度測定方法 Testing method for bending strength of pattern materials in investment casting

GB/T 14235.3-1993 熔模鑄造模料 灰分測定方法 Testing method for ash content of pattern materials in investment casting

GB/T 14235.4-1993 熔模鑄造模料 線收縮率測定方法 Testing method for linear contraction of pattern materials in investment casting

GB/T 14235.5-1993 熔模鑄造模料 表面硬度測定方法 Testing method for surface hardness of pattern materials in investment casting

GB/T 14235.6-1993 熔模鑄造模料 酸值測定方法 Testing method for acid number of pattern materials in investment casting

GB/T 14235.7-1993 熔模鑄造模料 流動性測定方法 Testing method for fluidity of pattern materials in investment casting

GB/T 14235.8-1993 熔模鑄造模料 粘度測定方法 Testing method for viscosity of pattern materials in investment casting

GB/T 14235.9-1993 熔模鑄造模料 熱穩定性測定方法 Testing method for thermal stability of pattern materials in investment casting

GB/T 14408-1993 一般工程与結构用低合金鑄鋼件 Low alloy steel castings for general engineering and structural purposes

GB/T 15055-1994 衝壓件未注公差尺寸极限偏差 Permissible stamping varitions in dimensions without tolerance indication

GB/T 15056-1994 鑄造表面粗糙度 評定方法 Evaluation method on cast surface roughness

GB/T 15111-1994 點焊接頭剪切拉伸疲勞試驗方法 Test method for shear tensile fatigue of spot welded joints

GB/T 15114-1994 鋁合金壓鑄件 Aluminium alloy die-castings

GB/T 15115-1994 壓鑄鋁合金 Die casting aluminium alloys

GB/T 15116-1994 壓鑄銅合金 Die casting copper alloys

GB/T 15117-1994 銅合金壓鑄件 Copper alloy die castings

GB/T 15169-1994 鋼熔化焊手焊工資格考核方法 Approval testing of manual welders--Fusion welding-steel

GB/T 15620-1995 鎳及鎳合金焊絲 Nickel and nickel alloy welding wires

GB 15735-1995 金屬熱處理生產過程安全衛生要求 Requirements for the safety and health in production process of metal heat treatment

GB/T 15747-1995 正面角焊縫接頭拉伸試驗方法 Method of tension test for front fillet welded joint

GB/T 15825.1-1995 金屬薄板成形性能与試驗方法 成形性能和指標 Sheet metal formability and test methods--Formability and indexes

GB/T 15825.2-1995 金屬薄板成形性能与試驗方法 通用試驗規程 Sheet metal formability and test methods--General test rules

GB/T 15825.3-1995 金屬薄板成形性能与試驗方法 拉深与拉深載荷試驗 Sheet metal formability and test methods--Drawing and drawing load test

GB/T 15825.4-1995 金屬薄板成形性能和試驗方法 擴孔試驗 Sheet metal formability and test methods--Hole expanding test

GB/T 15825.5-1995 金屬薄板成形性能与試驗方法 彎曲試驗 Sheet metal formability and test methods--Bending test

GB/T 15825.6-1995 金屬薄板成形性能与試驗方法 錐杯試驗 Sheet metal formability and test methods--Conical cup test

GB/T 15825.7-1995 金屬薄板成形性能与試驗方法 凸耳試驗 Sheet metal formability and test methods--Earing test

GB/T 15825.8-1995 金屬薄板成形性能与試驗方法 成形极限圖(FLD)試驗 Sheet metal formability and test methods--Forming limit diagram (FLD) test

GB/T 15826.1-1995 錘上鋼質自由鍛件机械加工余量与公差一般要求 Machining allowances and tolerances for steel open die forgings on hammer--General reguirement

GB/T 15826.2-1995 錘上鋼質自由鍛件机械加工余量与公差盤﹛柱類 Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns

GB/T 15826.3-1995 錘上鋼質自由鍛件机械加工余量与公差 帶孔圓盤類 Machining allowances and tolerances for steel open die forgings on hammer--Disk swith holes

GB/T 15826.4-1995 錘上鋼質自由鍛件机械加工余量与公差 圓環類 Machining allowances and tolerances for steel open die forgings on hammer--Rings

GB/T 15826.5-1995 錘上鋼質自由鍛件机械加工余量与公差 套筒類 Machining allowances and tolerances for steel open die forgings on hammer--Seamles cylinder hushings

GB/T 15826.6-1995 錘上鋼質自由鍛件机械加工余量与公差 光軸類 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps

GB/T 15826.7-1995 錘上鋼質自由鍛件机械加工余量与公差 台階軸類 Machining allowances and tolerances for steel open die forgings on hammer--Shaft with steps

GB/T 15826.8-1995 錘上鋼質自由鍛件机械加工余量与公差 單拐曲軸類 Machining allowances and tolerances for steel open dle forgings on hammer--Single throw crankshaft

GB/T 15826.9-1995 錘上鋼質自由鍛件机械加工余量与公差 黑皮鍛件 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining

GB/T 15829.1-1995 軟　焊用　劑 分類﹛標記与包裝 Soldering fluxes--Classification, labelling and packaging

GB/T 15829.2-1995 軟　焊用　劑 樹脂類　劑 Soldering fluxes--Resin basis fluxes

GB/T 15829.3-1995 軟　焊用　劑 有机物類　劑 Soldering fluxes--Organic fluxes

GB/T 15829.4-1995 軟　焊用　劑 無机物類　劑 Soldering fluxes--Inorganic fluxes

GB/T 16253-1996 承壓鋼鑄件 Steel castings for pressure purposes

GB/T 16672-1996 焊縫 工作位置 傾角和轉角的定義 Welds--Working positions--Definitions of angles of slope and rotation

GB/T 8541-1997 鍛壓術語 Terminolgy of forging and stamping

GB/T 16743-1997 衝裁間隙 Blanking clearance

GB/T 16746-1997 鋅合金鑄件 Zinc alloy castings

GB/T 1175-1997 鑄造鋅合金 Casting zinc alloys

GB/T 16923-1997 鋼件的正火与退火 Normalizing and annealing of steel parts

GB/T 16924-1997 鋼件的淬火与回火 Quenching and tempering of steel parts

GB/T 16957-1997 复合鋼板焊接接頭力學性能試驗方法 Mechanical tests on welded joints in clad plates

GB/T 6060.1-1997 表面粗糙度比較樣塊 鑄造表面 Roughness comparison specimens Cast surfaces

GB/T 5611-1998 鑄造術語 Foundry terminology

GB/T 5680-1998 高錳鋼鑄件 Austenitic manganese steel castings

GB/T 9442-1998 鑄造用硅砂 Foundry silica sand

GB/T 17445-1998 鑄造磨球 Cast grinding balls

GB/T 12467.1-1998 焊接質量要求 金屬材料的熔化焊 第一部分: 選擇及使用指南 Quality requirements for welding--Fusion welding of metallic materials--Part 1: Guidelines for selection and use

GB/T 12467.2-1998 焊接質量要求 金屬材料的熔化焊 第二部分: 完整質量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 2: Comprehensive quality requirements

GB/T 12467.3-1998 焊接質量要求 金屬材料的熔化焊 第三部分: 一般質量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 3: Standards quality requirements

GB/T 12467.4-1998 焊接質量要求 金屬材料的熔化焊 第四部分: 基本質量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 4: Elementary quality requirements